Like
Measure out and mark the center of the soundhole on the soundboard. I do this by tracing the outline of the form on the soundboard and measuring (in this case, 149 mm) from the top of the outline down the glue joint of the bookmatched pair. The jig on the left
Like
*Note: The jig used in this tutorial can be constructed using the plans provided at this link: Radial Rosettes: Building the Radial Rosette Maker. I cut my scrap material (In this case, Zebrawood) into 2″ strips. I prefer the material to be approximately 1/8″ in thickness, give or take 1/32″. This
Like
Also see: Radial Rosettes: Making a Basic Pattern Whether following plans from a kit or building from scratch, the rosette is an opportunity for the luthier to be creative and flaunt their artistic skills. A rosette pattern designed with artistic discernment and then executed with the utmost precision is the envy of instrument